Name: Carla
Author: Carla developers

LADSPA version 0.4.17 and LV2 version 1.0.16

TAP-plugins

LADSPA version 1.0.1, LV2 version 1.0.0

Tom's Audio Processing LADSPA and LV2 plugins

Linux Studio Plugins include the following plugins in LADSPA,
 LV2, VST, VST3 and CLAP with mono (M), stereo (S), left-right (LR) and
 mid-side (MS) variants:
 <ul>
 <li>Limiter M / S</li>
 <li>Dynamic processor LR / MS / M / S</li>
 <li>Expander LR / MS / M / S</li>
 <li>Clipper (NEW in 1.2.14)</li>
 <li>Crossover x8 LR / MS / M / S</li>
 <li>Filter M / S (NEW in 1.2.8)</li>
 <li>Flanger M / S (NEW in 1.2.8)</li>
 <li>Gate LR / MS / M / S</li>
 <li>GOTT Compressor LR / MS / M / S (NEW in 1.2.8)</li>
 <li>Graphic Equalizer x16 and x32 LR / MS / M / S</li>
 <li>Impulse Response M / S</li>
 <li>Impulse Reverb M / S</li>
 <li>Sampler M / S</li>
 <li>Compressor LR / MS / M / S</li>
 <li>Artistic M / S</li>
 <li>Latency Meter</li>
 <li>Multiband expander x8 LR / MS / M / S</li>
 <li>Multiband gate x8 LR / MS / M / S</li>
 <li>Multiband clipper (NEW in 1.2.14)</li>
 <li>Multiband compressor x8 LR / MS / M / S</li>
 <li>Multiband limiter M / S (NEW in 1.2.8)</li>
 <li>Oscillator Mono</li>
 <li>Oscilloscope x1, x2 and x4.</li>
 <li>Parametric Equalizer x8 LR / MS / M / S (NEW in 1.2.14)</li>
 <li>Parametric Equalizer x16 LR / MS / M / S</li>
 <li>Parametric Equalizer x32 LR / MS / M / S</li>
 <li>Phase detector</li>
 <li>Profiler M / S</li>
 <li>Room builder M / S</li>
 <li>Multi-sampler x12 Direct out / stereo</li>
 <li>Multi-sampler x24 Direct out / stereo</li>
 <li>Multi-sampler x48 Direct out / stereo</li>
 <li>Sidechain multiband expander x8 LR / MS / M / S</li>
 <li>Sidechain multiband gate x8 LR / MS / M / S</li>
 <li>Sidechain multiband compressor x8 LR / MS / M / S</li>
 <li>Sidechain Limiter M / S</li>
 <li>Sidechain Dynamic processor LR / MS / M / S</li>
 <li>Sidechain Expander LR / MS / M / S</li>
 <li>Sidechain Gate LR / MS / M / S</li>
 <li>Sidechain Compressor LR / MS / M / S</li>
 <li>Slapback Delay M / S</li>
 <li>Spectrum Analyzer x1</li>
 <li>Spectrum Analyzer x2</li>
 <li>Spectrum Analyzer x4</li>
 <li>Spectrum Analyzer x8</li>
 <li>Spectrum Analyzer x12</li>
 <li>Spectrum Analyzer x16</li>
 <li>Trigger MIDI M / S</li>
 <li>Trigger M / S</li>
 <li>Delay Compensator M / S</li>
 <li>Delay Compensator x2 Stereo</li>
 <li>Loudness Compensator M / S (NEW in 1.1.24)</li>
 <li>Surge Filter M / S (NEW in 1.1.24)</li>
 <li>Mixer M / S (NEW in 1.2.6)</li>
 <li>Beat Breather (NEW in 1.2.10)</li>
 </ul>

<ul>
 <li>Added experimental VST3 plugin format support.</li>
 <li>Added built-in presets for Compressor plugin series.</li>
 <li>Fixed bug in smoothing mode of Parametric Equalizer and
 Filter plugins that could be caused when using large buffer
 sizes. Additional optimizations to reduce CPU resources when
 processing in smoothing mode.</li>
 <li>Updated behaviour of band frequency splits in the UI for
 Multiband Compressor, Multiband Expander, Multiband Gate
 Multiband Dynamic Processor and Crossover plugin
 series.</li>
 <li>Several bugfixes and improvements in implementations of
 VST2, LV2 and CLAP formats.</li>
 <li>Added possibility to manually enter channel name in
 Mixer plugin series.</li>
 <li>Added MIDI velocity control code display in Sampler and
 Multisampler plugin series.</li>
 <li>Added support of LR2 (12 dB/oct) filters by the
 Crossover plugins series.</li>
 <li>Added S/M Apply switch to Crossover plugin series that
 applies effect of Solo/Mute buttons to corresponding
 frequency band's outputs.</li>
 <li>Improved grid color and visibility for the Spectrum
 analyzer plugin series in Spectralizer mode.</li>
 <li>Implemented Hold option for Compressor, Dynamics
 Processor, Expander and Gate plugin series.</li>
 <li>Implemented Hold option for Multiband Compressor,
 Dynamics Processor, Expander and Gate plugin series.</li>
 <li>Added Dry/Wet balance control for Compressor, Dynamics
 Processor, Expander, Gate and Trigger plugin series.</li>
 <li>Added Dry/Wet balance control for Multiband Compressor,
 Dynamics Processor, Expander, Gate and GOTT Compressor
 plugin series.</li>
 <li>Fixed phasing issue between dry and wet signal for GOTT
 Compressor in Linear Phase mode.</li>
 <li>Fixed invalid curve markers display in Multiband Gate
 plugin series.</li>
 <li>Re-implemented allpass filters for Equalizer that could
 yield to high frequency pitch buildup.</li>
 <li>Updated split editing behaviour for Multiband plugin
 series and Crossover plugin series.</li>
 <li>Added basic UI design guidelines to the
 documentation.</li>
 <li>Several bugfixes in graphic toolkit library.</li>
 </ul>

<ul>
 <li>Implemented Clipper plugins series.</li>
 <li>Implemented Multiband Clipper plugin series.</li>
 <li>Implemented Parametric Equalizer x8 plugin series.</li>
 <li>Updated VST 2.x plugin naming to fit the maximum possible
 length of 31 characters.</li>
 <li>Added tracking of maximum values option for Spectrum
 Analyzer plugin series.</li>
 <li>Added possibility to change frequency values by double
 click for GOTT Compressor.</li>
 <li>Improved performance of expression language in the
 UI.</li>
 <li>Implemented separate input and output signal spectrum
 analysis for Filter, Graphic Equalizer and Parametric
 Equalizer plugin series.</li>
 <li>Updated default value and extended range of the zoom
 fader for Filter, Graphic Equalizer and Parametric Equalizer
 plugin series.</li>
 <li>Added possibility to globally adjust filter point size
 for Filter, Graphic Equalizer and Parametric Equalizer plugin
 series.</li>
 <li>Added gain level display for filter info of the
 Parametric Equalizer and Filter plugin series.</li>
 <li>Added missing inline display to the Autogain plugin
 series.</li>
 <li>Threshold markers are now editable for all dynamics and
 multiband dynamics plugins.</li>
 <li>Implemented switch that controls automatic scaling of
 spectrum graph for plugin series:</li>
 <li>- Beat Breaher.</li>
 <li>- Filter.</li>
 <li>- GOTT Compressor.</li>
 <li>- Graphic Equalizer.</li>
 <li>- Multiband Compressor.</li>
 <li>- Multiband Dynamic Processor.</li>
 <li>- Multiband Gate.</li>
 <li>- Multiband Expander.</li>
 <li>- Multiband Limiter.</li>
 <li>- Noise Generator.</li>
 <li>- Parametric Equalizer.</li>
 <li>Many code updates that could cause potential problems
 related to using another decimal point for floating-point
 number formatting.</li>
 <li>Added frequency and note displaying for band splits for
 all multiband plugin series.</li>
 <li>Added support of storing current file type selection in
 file dialogs of UI.</li>
 <li>Optimization of compressor and gate functions using
 AVX-512 instruction set.</li>
 <li>Fixed bug in Mid/Side conversion functions for AArch64
 architecture (contributed by marcan at GitHub).</li>
 <li>Introduced SIMD-optimized expander curve and gain
 functions.</li>
 <li>Improved performance of logarithmic values calculations
 for DSP modules.</li>
 </ul>

<ul>
 <li>Fixed bug in Multiband Limiter plugin series caused by
 invalid processing of large input buffers.</li>
 <li>Fixed bug in Compensation Delay plugin series caused by
 invalid processing of large input buffers.</li>
 <li>Fixed crackling sound caused by small buffer gaps in
 Autogain plugin series.</li>
 <li>Fixed bug introduced in 1.2.11 version related to
 improper optimized function for AVX-512 instruction set that
 could cause dynamic processing plugins (like Compressor,
 Expander, Gate, etc) work improperly.</li>
 <li>Several optimizations of DSP library with AVX and AVX2
 instruction sets.</li>
 <li>Many additional optimizations of DSP library with
 AVX-512 instruction set.</li>
 <li>Optimizations of compressor, expander and gate modules
 with SIMD instructions.</li>
 <li>Gate module now uses lsp-dsp-lib for low-level gain and
 curve optimizations.</li>
 <li>Reduced the gain curve refresh rate for all multiband
 plugins which may reduce CPU usage for small input buffer
 sizes.</li>
 <li>Optimized common gain curve calculation for all
 multiband plugins.</li>
 </ul>

<ul>
 <li>Implemented Autogain plugin series for controlling the
 loudness of the signal according to the ITU-R BS.1770-4
 specificaions.</li>
 <li>Implemented SIMD-optimized curve and gain calculation
 functions for compressors which allow to lower the CPU
 consumption by compressor plugins.</li>
 <li>More AVX-512 optimized functions added to the low-level
 DSP code.</li>
 <li>Additional SIMD-optimized functions added to DSP
 library.</li>
 <li>Fixed VST2 plugin crash on UI close in OBS Studio.</li>
 <li>Fixed invalid default values of parameters for CLAP
 plugin format.</li>
 <li>Fixed double memory free of generated port metadata in
 CLAP, VST2 and LV2 wrappers.</li>
 <li>Fixed HPF/LPF knob activity in the UI for multiband
 dynamics plugins.</li>
 </ul>

Linux Studio Plugins LADSPA/LV2/VST/VST3/CLAP

<ul><li>Fix a few minor metadata issues.</li><li>Fix initial noise with Piano (zero comb filter and voices on startup).</li><li>Fix invalid Vocoder preset description.</li><li>Fix misleading indentation warnings with GCC 6.</li><li>Update build system.</li><li>Use rdfs:label for port groups.</li></ul>

ZamAudio LADSPA/LV2/VST/VST3/CLAP plugins:<ul><li>ZaMaximX2: brickwall limiter</li><li>ZamAutoSat: automatic saturation</li><li>ZamComp and ZamCompX2: compressor, mono and stero</li><li>ZamEQ2: 2 bands parametric equalizer</li><li>ZamGEQ31: 31 band graphic equalizer</li><li>ZamHeadX2: HRTF acoustic filtering</li><li>ZamPhono: phono filters for restoring vinyl</li><li>ZamGate and ZamGateX2: gate mono and stereo</li><li>ZamTube: distortion effect modeled after tone stacks from guitar amplifiers</li><li>ZamDelay: feedback delay unit</li><li>ZamDynamicEQ: dynamic equalizer</li><li>ZaMultiComp and ZaMultiCompX2: multiband compressor, mono and stereo</li><li>ZamSynth: experimental synthesizer</li></ul>

ZamPlugins

<ul><li>ZamTube: Introduced both sides of 12AX7 valve emulation with tonestack sandwiched between the valves.</li><li>ZamHeadX2: Fixed bug with wrong array dimensions.</li><li>Fix VST2 param bug and other improvements.</li></ul>

ZamAudio Plugins LADSPA/LV2/VST/VST3/CLAP

Calf

CAPS

These are the LV2 Plugins.
 
 
 Guitarix is a virtual guitar amplifier for Linux.
 
 
 Guitarix takes the signal from your guitar as any real amp would
 do: as a mono-signal from your sound card. The input is processed
 by a main amp and a rack-section. Both can be routed separately
 and deliver a processed stereo-signal via Jack. You may fill the
 rack with effects from more than 25 built-in modules including
 stuff from a simple noise gate to brain-slashing modulation f/x
 like flanger, phaser or auto-wah.
 
 
 Your signal is processed with minimum latency. On any properly
 set-up Linux-system you don't have to wait more than 10ms until
 your sound is processed by guitarix.

Guitarix LV2

ZynAddSubFx Synthesizer

ZynAddSubFx (with Zyn-Fusion UI) DSSI/LV2/VST plugins

Helm Synthesizer

avldrums.lv2 is a drum sample player plugin dedicated to Glen MacArthur's AVL Drumkits. This self-contained plugin provides a convenient way to rapidly sequence and mix midi-drums.The AVLdrums comes as four separate drumkits: Black Pearl, Red Zeppelin, the Blonde Bop kit played with regular sticks and Blonde Bop Hot Rods played with rute sticks. There are 5 velocity layers for each of the 28 kits pieces or drum-zones for both kits.Include the following kits:<ul><li>Red Zeppelin</li><li>Black Pearl</li><li>Blonde Bop</li><li>Blonde Bop Hot Rod</li></ul>

AVLDrums.lv2

This collection of LV2 plugins contains:<ul><li>balance.lv2 (0.6.10): Stereo balance</li><li>controlfilter.lv2 (0.5.1): filter/process Control Parameters</li><li>darc.lv2 (0.6.5): Dynamic Audio Range Compressor</li><li>dpl.lv2 (0.6.5): Digital Peak Limiter</li><li>fat1.lv2 (0.8.6): AutoTune-1 auto-tuner based on Fons Adriaensen's zita-at1</li><li>fil4.lv2 (0.8.7): 4 band Parametric Equalizer</li><li>matrixmixer.lv2 (0.4.6): a matrix mixer</li><li>meters.lv2 (0.9.25): Audio Level Meters</li><li>mididebug.lv2 (0.3.4): MIDI Message Generator</li><li>midifilter.lv2 (0.7.2): Filter MIDI events</li><li>midigen.lv2 (0.4.2): Midi Event Generator</li><li>midimap.lv2 (0.4.4): Midi Event Mapper</li><li>mixtri.lv2 (0.4.10): a matrix mixer and trigger processor</li><li>nodelay.lv2 (0.6.3): a simple audio delay-line</li><li>onsettrigger.lv2 (0.4.3): audio to midi converter currently intended for Bass/Kick-drums</li><li>phaserotate.lv (0.6.4): audio file phase rotator</li><li>sisco.lv2 (0.9.10): simple audio oscilloscope</li><li>spectra.lv2 (0.6.5): Spectr Spectrum Analyzer</li><li>stepseq.lv2 (0.6.13): 8x8 Midi Step Sequencer</li><li>stereoroute.lv2 (0.2.3): versatile stereo to mono downmix utility</li><li>testsignal.lv2 (0.6.5): audio-plugin for generating test-signals</li><li>tuna.LV2 (0.6.5): musical instrument tuner with strobe characteristics</li><li>xfade.lv2 (0.3.5): audio plugin for stereo cross-fading 2 x 2 input channels to 2 output channels</li><li>zconvo.lv2 (0.6.8): plugin to convolve audio signals</li></ul>

x42Plugins

midifilter.lv2 0.7.3 : Properly constrain CC2Note mode control #36dpl.lv2 0.6.6fat1.lv2 0.8.7fil4.lv2 0.8.8phaserotate.lv2 0.6.5zconvo.lv2 0.7.1

fat1.lv2 0.8.6: reduce jitter and fix latency.zconvo.lv2 0.6.8: Fix loading custom files.

Surge XT is an Hybrid SynthesizerFeaturing many synthesis techniques, a great selection of filters, a flexible modulation engine, a smorgasbord of effects, and modern features like MPE and microtuning.This is the VST3/CLAP plugins version.

Surge XT Synthesizer VST3/CLAP

<ul><li>Add TouchOSC template download link</li><li>Do the same select trick on TypeAhead</li><li>Quit on Linux CLI with OSC works properly</li><li>Patch updates</li></ul>

Surge XT synthesizer and effects VST3/CLAP plugins

DISTRHO-Ports LV2, VST and VST3 plugins includes:<ul><li>Artican: The Function and The Pilgrim</li><li>Dexed: Synth that is closely modeled on the Yamaha DX7.</li><li>dRowAudio: Distortion, Distortion Shaper, Flanger, Reverb, Tremolo.</li><li>EasySSP: Easy Sound Space Perception audio visualization tool.</li><li>HiReSam: Spectrum Analyzer.</li><li>JuceOPL: Classic game sounds synthesizer.</li><li>Juced: DrumSynth and EQinox.</li><li>KlangFalter: A convolution audio plugin.</li><li>LUFS Meter: Measures loudness similar to the human perception of loudness.</li><li>Luftikus: Analog EQ with fixed half-octave bands and additional high frequency boost.</li><li>Obxd: Emulation of famous ob-x, ob-xa and ob8 synths.</li><li>PitchedDelay: Delay that allow pitching the delayed signal.</li><li>ReFine: Add a final polishing to your tracks, busses and masters.</li><li>Stereo Source Separator: Uses the spatial information hidden in the stereo signal for source separation.</li><li>(NEW) SwankyAmp: A tube amplifier simulation DSP plugin which aims to capture the details in the dynamics of tube amplifiers.</li><li>TAL Plugins: Dub-3, Filter, Filter-2, NoiseMaker, Reverb, Reverb-2, Reverb-3 and Vocoder-2.</li><li>Temper: modern digital distortion.</li><li>Vex: A 3 oscillator subtractive waverom synth.</li><li>(NEW) Vitalium: A Spectral warping wavetable synth.</li><li>Wolpertinger: Subtractive, antialiased polyphonic software synthesizer.</li></ul>

DISTRHO-Ports

<ul><li>Add SwankyAmp</li><li>Add Vitalium</li><li>Fix up LV2 wrapper with juce-current</li><li>Sync juce-current with latest juce</li><li>Tweak build system to drop a few run-time dependencies for juce-current</li><li>Removed CHOW</li></ul>

<ul><li>Fix out of bounds buffer write in drowaudio-reverb (leading to memory corruption and/or crashes)</li><li>Fix lv2 export preset meta-data validation</li><li>Fix lv2 ttl generation when cross-compiling (e.g. using mingw and wine within linux)</li><li>Fix exported symbols</li><li>Fix build/compatibility with macOS 11 / arm64</li></ul>

<ul><li>Add CHOW plugin (used to test updated JUCE)</li><li>Include new and legacy JUCE in source code (legacy JUCE will only receive bug-fixes)</li><li>Rebase DISTRHO-Ports patches against JUCE6 codebase, available in libs/juce-current/patches</li><li>Fix LV2 wrapper to build against latest JUCE</li><li>General cleanup to build system</li></ul>

<ul><li>Add HiReSam plugin port</li><li>Add ReFine plugin port</li><li>Add Temper plugin port</li><li>Fix build for ARM NEON target</li><li>Fix LV2 UI notifications happening in non-GUI thread</li><li>Fix LV2 meta-data to pass lv2lint errors</li><li>Update JUCE (current plugins frozen in a known good but slightly old version, with cherry-picked fixes)</li><li>Switch build system from premake3 to meson</li></ul>

sfizz

<ul><li>Updated the engine to 1.2.3</li><li>Various sound fixes: gain, notes conflict, aftertouch</li></ul>

Added<ul><li>WavPack support (#1129 by @lucianoiam)</li></ul>Changed<ul><li>The project has been split into 2 repositories to separate the library from the UI/plugins. (#1162)</li><li>Unclamp the cutoff and add OSC queries for the cutoff modifiers (#1100 by @PythonBlue)</li><li>Update cpuid, dr_libs and stb_vorbis libraries (#1164)</li><li>Configurable amount of Control Change messages via CMake' MIDI_CC_COUNT variable,</li></ul>

<ul><li>Corrected race conditions that appeared with the new thread and file pools (#507 #508 #514 #521)</li><li>Take the internal oversampling factor into account for loop points, and solve an issue where loop points specified in sfz files were not taken into account (#506)</li><li>Fix an implementation error for the internal hash function when applied on a single byte (#512)</li><li>Knobs are linear in the AU plugin (#517)</li><li>Fix a crash in VSTGUI (#520)</li></ul>

Big stuff:<ul><li>Added basic support for Flex EGs (#388) as modulation sources (targets to come)</li><li>Added basic support for LFOs (#338) as modulation sources (targets to come)</li><li>EGs and LFOs can now target EQs and filters (#424)</li><li>A new GUI has been added and is common to the LV2 and VST plugin (#397 #404 #419 #489 #492 #495 #496 #497); still mostly work in progress, more to come!</li><li>Provided build systems to use sfizz with the VCV-Rack SDK and the DISTRHO Plugin Framework</li></ul>New features:<ul><li>Added support for sustain_lo (#327)</li><li>Audio files are now read incrementally, improving the availability under load (#294)</li><li>A new output port for active voices has been added in the LV2 plugin (#321)</li><li>Added support for effect types reverb, disto, gate and comp</li><li>The voice stealing is now configurable using hint_stealing, with possible values as first, oldest (default), and envelope_and_age. The latter is the more CPU-consuming version which requires to follow the envelope of each voice to kill low-volume ones preferably. Note that the voice stealing continue to kill all voices started on the same event by default (i.e. all layers of the same note). (#344 #384 #353)</li><li>sfizz now internally uses a modulation matrix to link all modulation sources (CC, LFOs, and EGs) and targets (#335 #351 #386)</li><li>Added support for off_time and complete support for off_mode. The voice stealing logic was improved to take into account polyphony, note_polyphony and group_polyphony properly (#349 #352 #393 #413 #414 #467). Note that this support is also available for the engine polyphony. In this case, some additional voice will take over for the release duration (#477).</li><li>The wavetable quality has been improved (#347)</li><li>Support for offset_cc (#385)</li><li>sfizz_render now supports a --quality switch, which acts like the sample_quality= opcode (#408)</li><li>pitch_keycenter=sample is now taken into account (#362)</li><li>Support oscillator_detunecc (#434)</li><li>Support basic FM synthesis for oscillator regions (#436)</li><li>CC 7, 10 and 11 are now linked by default to pan, volume and expression (#475)</li><li>Support hint_ram_loading for loading the whole samples in RAM (#353)</li><li>Support for loop_crossfade (#464)</li><li>All phase-related opcodes in sfizz now use the 0-&gt;1 convention, as does ARIA/Sforzando, instead of the 0-&gt;360 convention (#499)</li></ul>Issues:<ul><li>Loading probable wavetable files, or wav files containing wavetable metadata now sets oscillator=on on the region (#431)</li><li>The default sample_quality was put back to 1 for live playing and 2 for freewheeling (#405)</li><li>Fix an unwanted copy in the realtime thread (#334)</li><li>Improve the filter shortcut path (#336)</li><li>Fix the default ampeg_attack and ampeg_release to avoid clicks (#437)</li><li>Corrected a race condition in freewheeling mode (#500)</li><li>Fixed a potential non-realtime operation in the realtime thread (#498)</li><li>Fix a bug when using a larger internal oversampling for regions with an offset value (#469)</li><li>Fix an issue when loops occured more than once in a block (#462)</li><li>Increase the range of the clamping on amplitude (#468) and pitch (#474)</li><li>Fix CC modulations with their source depth set to 0 (#475)</li><li>Fix an overshoot for crazily large cutoff values (#478); cutoffs are now clamped</li><li>Improve the file loading logic to keep files in memory for a short while in case they get reused (#425)</li><li>Fix the MIDNAM output for the case where extended CCs are used (#420)</li><li>Fixed a bug where release voices where not ignored on self-mask search (#348)</li><li>Improved the release logic in many cases (#324 #414 #413)</li><li>Set the level of the *noise generator to match ARIA's (#429)</li><li>Support for atom:Blank atoms in the LV2 plugin (#363)</li><li>Fixed amp_veltrack behavior (#371)</li><li>Fix the ADSRH envelope release rate (#376)</li><li>Fixed an error for files where the loop spans the entire file (#378)</li><li>Fixed sustain_cc behavior (#377)</li><li>Match the default volumes with ARIA (#381)</li><li>Properly set the loop_mode for release regions (#379)</li><li>Regions with end=0 are now properly disabled (#380)</li><li>Fix fil_random to be bipolar (#452)</li><li>The sequence order now properly starts at 1 (#451)</li><li>Fix an issue on Flush to Zero on some ARM platforms (#455)</li><li>Fix pitch_veltrack (#461)</li><li>Opcode values now properly stop at the &lt; character (#439)</li><li>Fix various build errors and issues on all platforms (#345 #401 #400 #399 #417 #447 #449 #443 #453 #456 #459 #471 #484 #487 #488 #491)</li><li>The file dialog initial directory is now the root of the current loaded file (#428)</li><li>Existing and known CC values are now correctly taken into account for modulations (#421)</li><li>Fix various performance regressions and improved performance especially on ARM builds (#410 #412 #415 #426)</li></ul>API changes:<ul><li>Added API support for setting the playback state, time position and signature (#354)</li><li>The API documentation on the sfizz's website has been streamlined alot !</li></ul>

sfizz is a sample-based musical synthesizer LV2/VST3 plugin

GxPlugins contain the following Guitar effects plugins# = Includes master bypass* = The product names modeled in this software are trademarks of their respective companies that do not endorse and are not associated or affiliated with this simulation. All trademarks are the property of their respective holders.Includes the following overdrive pedals:<ul><li>GxBaJaTubeDriver.lv2# - Based on the BaJaTubeDriver*</li><li>GxBoobTube.lv2# - Based on the Boob Tube*</li><li>GxBottleRocket.lv2# - Based on the Mesa V1 Bottle Rocket* tube overdrive</li><li>GxClubDrive.lv2# - Overdrive Pedal Simulation based on a EF86 Pentode Valve Simulation.</li><li>GxDOP250.lv2# - Based on the Analog Man DOD OD-250 Yellow Overdrive*</li><li>GxEternity.lv2# - Low compression overdrive pedal</li><li>GxGuvnor.lv2 - Based on the Marshall "The Guv'nor" Overdrive*</li><li>GxHotBox.lv2# - Based on the Matchless Hot Box* tube overdrive</li><li>GxLuna.lv2# - Gnarly overdrive pedal simulation</li><li>GxSD1.lv2# - Based on the Boss SD-1 Super Overdrive*</li><li>GxSD2Lead.lv2# - Based on the Boss SD-2 Dual Overdrive*</li><li>GxShakaTube.lv2# - Based on the ShakaTube*</li><li>GxSloopyBlue.lv2# - Overdrive pedal simulation</li><li>GxTimRay.lv2# - Based on the Vemuram Jan Ray*</li><li>GxValveCaster.lv2# - Based on the Valve Caster*</li></ul>Includes the following Fuzz/Distortion pedals:<ul><li>GxAxisFace.lv2# - Based on the Axis Face Silicon* fuzz</li><li>GxFz1b.lv2# - Based on the Robert Moog-designed Maestro FZ-1B* fuzz</li><li>GxFz1s.lv2# - Based on the Maestro FZ-1S Super-Fuzz*</li><li>GxHyperion.lv2 - Based on the Devi Ever FX Hyperion* fuzz</li><li>GxHeathkit.lv2# - Based on the Heathkit TA-28* distortion/booster/fuzz</li><li>GxKnightFuzz.lv2# - Based on the Basic Audio Knight Fuzz* fuzz</li><li>GxLiquidDrive.lv2# - Based on the Liquid Drive* fuzz, a modified Ross Distortion*</li><li>GxSuppaToneBender.lv2 - Based on the Vox Supa Tonebender* fuzz</li><li>GxSaturator.lv2 - Based on the Joe Satriani-specified Vox Satchurator* distortion</li><li>GxSunFace.lv2# - Based on the Analog Man Sun Face* fuzz</li><li>GxSuperFuzz.lv2 - Based on the Univox Super-Fuzz*</li><li>GxToneMachine.lv2 - Based on the Foxx Tone Machine* fuzz</li><li>GxTubeDistortion.lv2# - Generic tube distortion based on Tube Distortion by Ron Black</li><li>GxVintageFuzzMaster.lv2 - Based on the Devi Ever Vintage Fuzz Master*</li><li>GxVoodoFuzz.lv2 - Based on the Voodoo Lab SuperFuzz*. It's basically a Bosstone* circuit, followed by the tone control of the Foxx Tone Machine* in parralel with a Devi Ever Dark Boost*.</li></ul>Includes the following amplifiers:<ul><li>GxBlueAmp.lv2# - Single - ended head amplifier simulation inspired by late 1950s Fender “Princeton” and “Champ” amplifier designs, it delivers tight bass, clean mids and highs.</li><li>GxCreamMachine# - Based on different circuits * Poweramp</li><li>GxEpic.lv2# - Based on Valve Junior*</li><li>GxMicroAmp.lv2# - A simple booster</li><li>GxPlexi.lv2# - Power Amp simulation * Poweramp</li><li>GxSupersonic.lv2# - Based on different circuits * Poweramp</li><li>GxSVT.lv2# - Based on the Ampeg SVT-CL Bass Head*</li><li>GxUvox720k - Based on Univox 720k keyboard amp from 1978</li><li>GxVBassPreAmp.lv2# - Simulation of the 1984 Vox Venue Bass 100 Pre Amp* section</li><li>GxVmk2.lv2 - Based on Vox MKII* solid state preamp of the late 60s</li></ul>Also includes other effects:<ul><li>GxQuack.lv2# - Autowah</li><li>GxSlowGear.lv2 - Based on the Boss Gx SlowGear*, attack-smoothing, auto-swelling pedal of the early 80s</li><li>GxUltraCab.lv2# - Cabinet simulator pedal</li></ul>

GxPlugins

Fix issue with ON/OFF toggle buttons.

<ul><li>Fix Do not hard-pin ld.</li><li>Fix LV2UI_Descriptor.</li></ul>

GM Synth

Extend MIDNAM: show drum note-names for drumkits

Surge Synthesizer

KapitonovPluginsPack contains the following LADSPA/LV2/VST3 plugins to customize your guitar tones:<ul><li>tubeAmp: Advanced guitar tube amp emulator. Contains preamp, tonestack, power amp with voltage sag, cabinet emulators. Emulation parameters of each component are set by profile files. LV2 only.</li><li>Bluedream: Booster/Tube Screamer pedal with equalizer (tonestack). LV2 version has GUI.</li><li>Distruction: Distortion pedal with equalizer (tonestack). LV2 version has GUI.</li><li>Fuzz: Vintage fuzz pedal. LV2 version has GUI.</li><li>Deadgate: Effective Noise Gate/Dead Zone effect plugin.</li><li>Octaver: Analog octaver pedal.</li><li>Single2Humbucker: Plugin for emulation humbucker pickup sound with single coil pickup on the guitar. Useful for playing heavy-metal on Stratocaster guitar with single coil pickups.</li></ul>

KapitonovPluginsPack

This release tested with Ardour 6.0 and brings back broken since 1.1 GUI with Qtractor!Changes:<ul><li>Added a built-in file picker dialog which replaces zenity.</li><li>Changed the models of Fuzz and Distortion plugins, now they emulate.</li><li>FuzzFace and Boss DS-1 pedals.</li><li>Added new profiles for tubeAmp.</li><li>Fixed bug with GUI plugins in Qtractor.</li></ul>

KapitonovPluginsPack Guitar amp LADSPA/LV2/VST3 plugins

Dragonfly Reverb is a bundle of free audio effect plugins (LV2, CLAP, VST and VST3).<ul><li>Dragonfly Hall Reverb is a free stereo-to-stereo reverb effect. It is primarily intended for use as a concert hall reverb. It also has numerous smaller presets representing rooms, studios, and chambers. It is based on Hibiki Reverb from Freeverb3VST, which uses Moorer's early reflection model and a modified FDN allpass Zita reverb.</li><li>Dragonfly Room Reverb is a free stereo-to-stereo reverb effect. It has several different room presets, as well as a small number of hall presets and effect presets. It is based on ProG Reverb from Freeverb3VST, which uses Moorer's early reflection model and an implementation of Jon Dattorro's Progenitor Reverb algorithm.</li><li>Dragonfly Plate is a free mono-to-stereo reverb plugin based on NVerb and STRev from Freeverb3 VST.</li><li>Dragonfly Early Reflections is a free stereo-to-stereo reverb effect based on Moorer's early reflection model as implemented in Freeverb3 VST. This is the same algorithm used in Dragonfly Hall and Dragonfly Room, but without any late reverberation algorithm.</li></ul>

DragonflyReverb

<ul><li>Fix bug in which setting predelay to zero does not update dsp predelay</li><li>Update to latest DPF - fixes CLAP on Linux</li></ul>

Attempt at fixing bug on HiDPI displays and added VST3

<ul><li>Attempt to fix issue when mod is set to zero in Dragonfly Hall.</li><li>Updated license to URI (to pass LV2 lint).</li><li>Updated homepage URI.</li><li>Fixed env var reference PKG_CONFIG in Makefiles.</li></ul>

Fix bug initializing dials and sliders that are set to zero upon loading the plugin.

Geonkick is a synthesizer capable of producing various percussion elements. The most basic examples are: kicks, snares, hi-hats, shakers, claps.

Geonkick

(UI) Fix conversion from frequency to note in the frequency envelope graph.

Features<ul><li>bring back VST3 plugin</li><li>support the session sample rate for VST3 plugin</li><li>integrated VST3 SDK into Geonkick build by providing the library into the 3rdparty directory</li></ul>Fixes<ul><li>export ModuleEntry/ModuleExit symbols for VST3 SDK</li><li>don't try to build standalone if there is no libjack dev library installed</li><li>fix a potential crash if the GUI graph thread was not created</li><li>for LV2 plugin tell the host that there is required ui:parent and ui:resize features (manifest file changes)</li></ul>

Remove redundant lock in the DSP worker

(null)<ul><li>Fix crash when opening multiple GUI for LV2</li><li>Find rapidjson when configuring at build</li><li>Add musl compatibility patch (Teldra / @teldra@likeable.space)</li></ul>(null)<ul><li>Add limiter to samples preview</li></ul>

<ul><li>Fix selection of the last MIDI column in the MIDI key popup</li><li>Move Redkite GUI toolkit into the Geonkick source and integrate it in the build system (no need to install Redkite now to build Geonkick)</li></ul>

Add scale factor 1.5x for UIFix some crashes (by updating the toolkit)

Sample rate agnosticNote: The preset that contain samples will work correctly only at the sample rate the preset was created.

<ul><li>Fix potential race condition</li><li>Remove lib prefix for plugin shared library</li></ul>

<ul><li>Set MIDI key popup for instruments</li><li>Export instrument kit to SFZ</li><li>16 stereo channels for standalone</li><li>Autoconnect ports to system playback for standalone</li></ul>

"Single" version of LV2 plugin (single instrument and single stereo channel)

Shared worker between plugin instances

Features:<ul><li>sample browser with sample preview</li><li>save/restore the last visited path, also save UI visual state</li><li>loaded sample is amplified</li><li>pitch shift (+- 48 semitones) envelope for oscillator when it uses a sample</li><li>added sound level indication for kit mixer</li><li>UI updates, switch between envelopes is more easy, removed the envelopes menu</li><li>option to scale the UI by factor of 2 for so-called HiDPI cases (Left Ctrl + f)</li></ul>

Fixes the looped continuous sound that is generated on some hosts (LV2 and VST3)

Fixes<ul><li>Fix updating kit UI when selecting a preset from host.</li><li>Fix some compile warnings in the vst plugin.</li></ul>Other<ul><li>Remove old presets.</li></ul>

Fixes delays in the process loop and improve the process loop

Fixes name label for output channels in LV2, fixes "Fanout" for channels (by Robin Gareus)

Added ARM supportFix showing limiter sound level

Fixes: add lv2:requiredFeature urid:map

Features:<ul><li>Reset to default button</li><li>Add stereo output channels for LV2, VST and standalone</li></ul>Improvements:<ul><li>Added compiler optimization flags and fast math</li><li>Process audio routines for LV2, VST and standalone was made more efficient, now DSP should take less CPU</li></ul>Fixes:<ul><li>Fix loading other audio format subtypes for samples</li><li>Reset to default shortcut</li><li>FHS friendly LV2 and VST3 plugin installation paths</li><li>Don't copy mute and solo settings when copy/paste percussion</li><li>Reverse sawtooth</li></ul>

<ul><li>Fix setting compiler flags</li></ul>

Improvements<ul><li>Follow the XDG standard for directories.</li><li>Search for presets in the $XDG_DATA_DIRS and $XDG_CONFIG_HOME.</li><li>Use GEONKICK_DATA_DIR when geonkick is installed in non a nonstandard path.</li></ul>

Fixes<ul><li>Fix crash when .local/geonkick path can't be created</li><li>Fix loading presets from .local/geonkick/presets</li></ul>

New features<ul><li>Kit mixer</li><li>Preset browser</li><li>Factory presets (installed under /usr/share/geonkick/presets or /usr/local/share/geonkick/presets)</li><li>Distortion volume envelope</li></ul>Improvements<ul><li>Range channels from 1 - 16 instead of 0 - 15</li><li>Added visual effect for play button and some other buttons</li></ul>Fixes<ul><li>Fix loading WAVEFORMATEX samples</li><li>Other small fixes</li></ul>

Fixes:<ul><li>Fix install of *.desktop file.</li><li>Fix finding Redkite lib64 in FindRedkite.cmake.</li><li>Add loading WAVEX samples.</li></ul>

This collection of LADSPA, DSSI, LV2, CLAP, VST and VST3 plugins contains:<ul><li>Mini-Series: 3-Band EQ, 3-Band splitter, Ping Pong Pan (LADSPA, LV2, CLAP, VST and VST3).</li><li>Max-Gen samples: MaBitcrush, MaFreeverb, MaGigaverb, MaPitchshift (LADSPA, LV2, CLAP, VST and VST3).</li><li>MVerb: Studio quality reverb (LADSPA, LV2, CLAP, VST and VST3).</li><li>ndc-Plugs: Amplitude Imposer, Cycle Shifter, SouForce (LADSPA, LV2, CLAP, VST and VST3).</li><li>Nekobi: simple single-oscillator synth based on Roland TB-303 (DSSI, LV2, CLAP, VST and VST3).</li><li>Kars: Simple karplus-strong plucked string synth (DSSI, LV2, CLAP, VST and VST3).</li><li>glBars: An OpenGL bars visualization plugin (LV2, CLAP, VST and VST3).</li><li>ProM: An awesome music visualizer (LV2, CLAP, VST and VST3).</li></ul>

DPF-Plugins

<ul><li>Fix build with clang on non-macOS systems</li><li>Fix CLAP plugins not saving state under Bitwig</li><li>Fix Nekobi tuning parameter</li></ul>

<ul><li>Initial CLAP support</li><li>Stabilize VST3 support</li><li>Set audio port configuration for all plugins</li><li>Set VST3 categories in a few more plugins</li><li>Update to latest DPF</li></ul>Plugin specific changes:<ul><li>Kars: Fix playback after a sample rate change</li><li>Nekobi: Fix deadlock when receiving a MIDI message bigger than 3 bytes</li><li>Nekobi: Make waveform slider behave as a button</li><li>ProM: Fix invalid context (GL compat instead of GL3) in some setups</li><li>ProM: Force keyboard focus on click</li></ul>

<ul><li>Initial experimental VST3 support</li><li>Add bottom-right resize handle in glBars and ProM, needed in plugin formats that can't do host-side resizing (ProM resize handle is invisible but still works, known issue)</li><li>Some plugin GUIs can use Cairo instead of OpenGL, if OpenGL is not available at build time</li><li>Standalones no longer require JACK, instead detecting at runtime if it is available</li><li>Standalones will now use RtAudio for native audio device access in case JACK is not available</li><li>ProM now ships with (optional) vendored libprojectM in case it is not available as system library</li><li>ProM now sets up and uses OpenGL3 context instead of OpenGL2 forward compatibility mode, fixing usage on macOS and Windows</li><li>Fix modal about dialogs</li><li>Fix more High-DPI related issues</li><li>Fix OpenGL context swap on GUI deletion, needed on hosts using OpenGL</li></ul>

DPF:<ul><li>Auto-detect compiler target, fixing as-is build with ARM systems</li><li>Allow to use EXE_WRAPPER as makefile option, to help cross-compilation</li><li>Fix build with headers in custom path</li><li>Fix "make install" for macOS and Windows</li><li>Fix exported LV2 metadata to pass checks/validation</li><li>Make mouse-wheel delta independent of window size</li></ul>Kars:<ul><li>Fix audio buffer reuse, causing bad audio in some hosts</li></ul>Nekobi:<ul><li>Set default MIDI CC for all parameters</li></ul>

DPF-Plugins LADSPA/DSSI/LV2/CLAP/VST/VST3

Dexed

<ul><li>Fix VST3 automation issues.</li><li>Fix to apply UI scaling only when applicable.</li><li>Fix hang notes on program changes.</li></ul>

<ul><li>Added support for SCL/KBM microtuning</li><li>Added initial support for MPE performance</li><li>A Collection of small UI changes, including higher contrast GUI assets, better sub-window management, and mouse wheel support</li><li>UI can be scaled to 150%; work in progress</li><li>Better accuracy on DX7 envelopes</li><li>VST3 support</li></ul>VST2 has been dropped because of licensing issues. Because of this the previous version is still included in this flatpak.

Yoshimi

<ul><li>BugFix: Command line prompt position not working.</li><li>BugFix: CLI not enabling scales but seeming to do so.</li><li>Add CLI warning when scales not enabled but scale action attempted.</li><li>Improved some CLI failure messages.</li><li>Added detail to CLI scales messages.</li><li>Updated docs.</li><li>Updated examples.</li></ul>

<ul><li>Improved UI</li><li>Themeing support</li></ul>

Yoshimi, a sophisticated soft-synth LV2 plugin

Wolf Shaper is a waveshaper plugin with a graph editor, in LV2, VST, VST3 and CLAP.

WolfShaper

Fix an issue with the Warp parameters (in some cases,
 modifying the warp type would appear to have no effect in the
 user interface)

<ul>
 <li>Fix dsp/gui inconsistencies and improve generic UI.</li>
 <li>Fix missing VST3 plugin categories.</li>
 <li>Set CLAP 'plugin features'.</li>
 <li>Set the UI as 'user resizable'.</li>
 </ul>

<ul>
 <li>VST3 and CLAP support.</li>
 <li>High-DPI support.</li>
 <li>Rework the context menu so that it does not create a separate window.</li>
 </ul>

<ul>
 <li>Context menu improvements.</li>
 <li>The UI does not try to remember its size anymore (this
 would cause some issues in some hosts, such as #126).</li>
 </ul>

Ninjas2

DrumGizmo

<ul><li>Default midimaps now read from drumkit file.</li><li>Sample selection default values improved.</li><li>New powermap feature.</li><li>Add gettext support to plugin UI with French translation.</li><li>Per instrument voice limit feature.</li></ul>

White Elephant Audio plugins are:<ul><li>Songbird Formant Filter (v2.3.0): provides two formant filters and an LFO modulated blend control between the two.</li><li>Richter Tremolo (v2.2.1): tremolo plugin featuring four tempo sync-able LFOs, two of which modulate the signal directly, whilst the other two modulate the previous two LFOs</li><li>Carve Distortion (v2.6.0): two stage wave shaping distortion, with multiple wave shapes and serial/parallel/stereo routing options.</li><li>MONSTR Stereo Imaging (v2.1.2): multiband stereo imaging plugin that allows the user to control the stereo width of a sound in 3 different frequency bands, and so can be used to perform common tasks such as narrowing the bass frequencies while adding width to the highs.</li></ul>

WhiteElephantAudio

Tunefish is a very tiny virtual analog synthesizer. It is developed to fit into about 10kb of compressed machine code while still producing an audio quality that can compete with commercial synthesizers.

Tunefish4

ADLplug OPL/OPN

ADLplug OPL3/OPN2 soundchip FM Synthesizer LV2/VST plugin

Fabla is an open-source LV2 drum sampler plugin instrument. It is ideal for loading up your favorite sampled sounds and bashing away on a MIDI controller. Or if it’s crafty beat programming your after that’s cool too! The ADSR envelope allows the shaping of hi-hats and kicks while the compressor beefs up the sound for thumping kicks!

Fabla

Fabla LV2 drum sampler plugin instrument.

ArtyFX

setBfree

setBfree DSP Tonewheel Organ emulator LV2

VL1Emulator

An emulator of Casio VL-Tone VL1 as LV2 plugin

This is the VST3 plugins package for SonoBus.SonoBus is an application for streaming high-quality, low-latency peer-to-peer audio between devices over the internet or a local network.Features:Connects multiple users together to send and receive audio among all in a group, with fine-grained control over latency, quality and overall mix. Includes optional input compression, noise gate, and EQ effects, along with a master reverb.All settings are dynamic, network statistics are clearly visible. Works as a standalone application on macOS, Windows, iOS, and GNU/Linux, and as an audio plugin (VST3). Use it on your desktop or in your DAW, or on your mobile device.Easy to setup and use, yet still provides all the details that audio nerds want to see. Audio quality can be instantly adjusted from full uncompressed PCM (16, 24, or 32 bit) or with various compressed bitrates (16-256 kbps per channel) using the low-latency Opus codec.

SonoBus VST3

New features:<ul><li>Multi-channel (&gt;2) support added.</li><li>Input Mixer added to control how the inputs are mixed and grouped for sending and for monitoring.</li><li>Input effects are now per channel as configured by grouping.</li><li>Full gate/compressor/eq effects now available per user track (and even per channel there if desired)</li><li>You can route remote users to specific outputs (if you have activated them, or are using the plugin in multi-bus capable host)</li><li>Can now insert Audio Unit plugin in "instrument" slots so you can get access to multi-bus outputs on hosts like Logic...</li><li>Added minimal/full view mode choice.</li><li>Recording filenames now include group name.</li><li>Added support for MP3 playing on platforms that didn't have it.</li><li>Initially mute incoming audio of new connections while they are auto-adjusting jitter buffers until stability is achieved.</li><li>Added Default User Volume level in options (fixed in 1.4.1),</li><li>Text Chat added, for another way to communicate within a group during a session.</li><li>Self-monitoring delay (and backing track delay) options to help overcome latency related rhythmic issues.</li><li>Added Group Latency Match feature</li><li>Added command line options to start sonobus and immediately connect, or to load a saved setup, along with basic "headless" operation mode for power users.</li><li>Initial translation support for several languages.</li></ul>Enhancements:<ul><li>Fixed bug when using file playback and recording simultaneously</li><li>Added return-to-start button for file playback (keybinding is 0)</li><li>Added Auto Jitter buffer adjust drop rate threshold option</li><li>Prevent user leave/join messages in chat in public groups</li><li>Simplified update check download</li><li>Fixed layout of public group page</li><li>Updated some visual elements (time sliders, etc)</li><li>Updated translations</li></ul>

Free and open source network audio streaming, VST3 plugins

So Synth LV2

Sorcer

Sorcer polyphonic wavetable synth LV2 plugin.

reMID

OB-Xd is a software synthesizer attempting to recreate the sound of the Oberheim OB-X syntehsizer.Available as LV2 and VST3 plugins.

OBXd

ChowTapeModel

Physical modelling signal processing for analog tape recording, LV2/CLAP/VST3 Plugin

Stochas is a probabilistic polyrhythmic sequencer. This is the VST3 and CLAP plugins.

Stochas VST3/CLAP

"Fire" is a multi-band distortion plugin. It supports preset save, multi-band distortion, downsample, eq, etc.This is the VST3 plugin.

Fire Distortion

Cardinal

Cardinal is a free and open-source LV2/VST/VST3/CLAP virtual modular synthesizer plugin

Airwindows LV2 is a port to Linux LV2 of the Airwindows plugins by Chris Johnson

Airwindows

This release contains the following new plugins:<ul><li>ConsoleLABuss</li><li>ConsoleLAChannel</li><li>Drive</li><li>FinalClip</li><li>Hull2</li><li>kPlateA</li><li>kPlateB</li><li>kPlateC</li><li>kPlateD</li><li>Luxor</li><li>PurestConsole3Buss</li><li>PurestConsole3Channel</li><li>RawGlitters</li><li>RawTimbers</li><li>Reverb</li><li>ShortBuss</li><li>TPDFDither</li><li>XLowpass</li><li>ZOutputStage</li></ul>

This release contains the following new plugins:<ul><li>BassAmp</li><li>BassDrive</li><li>BassKit</li><li>BigAmp</li><li>Cabs</li><li>FireAmp</li><li>Flipity</li><li>GrindAmp</li><li>LeadAmp</li><li>MidAmp</li><li>ResEQ</li><li>ResEQ2</li><li>Sinew</li></ul>

This release contains the following new plugins:<ul><li>Creature</li><li>Inflamer</li><li>Point</li><li>ToTape5</li></ul>

This release contains the following new plugins:<ul><li>Console8BussHype</li><li>Console8BussIn</li><li>Console8BussOut</li><li>Console8ChannelHype</li><li>Console8ChannelIn</li><li>Console8ChannelOut</li><li>Console8LiteBuss</li><li>Console8LiteChannel</li><li>Console8SubHype</li><li>Console8SubIn</li><li>Console8SubOut</li><li>EverySlew</li><li>GlitchShifter</li><li>GoldenSlew</li><li>LilAmp</li><li>PlatinumSlew</li></ul>

This release contains the following new plugins:<ul><li>BitShiftPan</li><li>BrightAmbience</li><li>BrightAmbience2</li><li>BrightAmbience3</li><li>ClipSoftly</li><li>Console0Channel</li><li>Console0Buss</li><li>EQ (Equalizer)</li><li>PitchNasty</li><li>SampleDelay</li><li>Spiral2</li></ul>Other fixes:<ul><li>Improve description for Verbity</li><li>Make sources C99 compliant</li></ul>

Added:<ul><li>PowerSag 2.0</li><li>PowerSag2 2.0</li></ul>

Added:<ul><li>Fracture 2.0</li><li>Infinity 2.0</li><li>Infinity2 2.0</li><li>MatrixVerb 2.0</li></ul>

Automatic audio mastering plugin for live-streaming, podcasting and internet radio stations.master_me is a multi platform, free and open source audio plug-in which optimizes sound in live streaming situations. Introducing no latency, it takes care of master levels and ‘polishes’ the sound with a chain of effects, closely modeled after the audio chain of Klaus Scheuermann’s mastering studio in Berlin, Germany.Although tempting, it is NOT intended to automatically master your produced music. Your art deserves closer, offline attention.

master_me

master_me audio mastering VST/VST3/LV2 plugin

Include the following GuitarML VST3 plugins<ul><li>Chameleon v1.2</li><li>PrincePedal v1.0 (x86_64 only)</li><li>Proteus v1.2</li><li>Smart Amp v1.3</li><li>Smart Pedal v1.5</li><li>TS-M1N3 pedal v1.2</li></ul>

GuitarML

GuitarML Amplifier and Pedals VST3 plugins.

BYOD (Bring Your Own Distortion) is a guitar distortion plugin
 with a customisable signal chain that allows users to create
 their own guitar distortion effects. The plugin contains a wide
 variety of distortion effects from analog modelled circuits to
 purely digital creations, along with some musical tone-shaping
 filters, and a handful of other useful processing blocks.
 
 
 This is the plugins package in LV2/VST3/CLAP.

BYOD

<ul>
 <li>Added "Laser Trem" module.</li>
 <li>Added "Poly Octave" module.</li>
 <li>Added "Tempo Sync" options for Delay module.</li>
 <li>Added a "Mix" parameter for Phaser4 module.</li>
 <li>Improved DSP performance for many of the modules.</li>
 <li>Improved memory-efficiency for Spring Reverb module.</li>
 <li>Improved handling of NaN inputs.</li>
 <li>Improved preset searching.</li>
 <li>Fixed host parameter automation not working in some cases.</li>
 <li>Fixed user presets not always showing in alphabetical order.</li>
 </ul>

<ul>
 <li>Added "Flapjack" module.</li>
 <li>Added "Fuzz Machine" module.</li>
 <li>Added "Mouse Drive" module.</li>
 <li>Added "Crying Child" module.</li>
 <li>Added "Krusher" module.</li>
 <li>Added "Solo-Vibe" module.</li>
 <li>Added "Ladder Filter" module.</li>
 <li>Added "MIDI Modulator" and "Param Modulator"
 modules.</li>
 <li>Added level tracking input and output ports for relevant
 modules.</li>
 <li>Added "netlist view" to allow for customization of some
 circuit-modelled modules.</li>
 <li>Added AVX support (for PCs that support it) for neural network-based modules.</li>
 <li>Added mouse interactions for selecting and
 moving/deleting multiple modules at once.</li>
 <li>Added port tooltips.</li>
 <li>Added sample rate correction filter for GuitarML
 module.</li>
 <li>Added support for CLAP preset discovery and preset
 loading.</li>
 <li>Improved preset search results.</li>
 <li>Improved custom IR loading/saving for "Amp IRs"
 module.</li>
 <li>Improved IR menu UX with mouse and keyboard
 interactions.</li>
 <li>Improved plugin RAM usage.</li>
 <li>Fixed hardened runtime flags for standalone audio input
 on MacOS.</li>
 <li>Fixed LFO waveform in Tremolo module.</li>
 <li>Fixed crash when scrolling presets in Loopy Pro.</li>
 </ul>

BYOD: Bring Your Own Distortion, LV2/VST3/CLAP plugins

This package include most of the ChowDSP plugins:<ul><li>ChowMatrix 1.3.0 (LV2/VST3)</li><li>ChowTapeModel 2.11.4 (LV2/VST3/CLAP)</li><li>ChowCentaur 1.4.0 (LV2/VST3)</li><li>ChowKick 1.2.0 (LV2/VST3/CLAP)</li><li>ChowPhaser 1.1.1 (LV2)</li></ul>

ChowDSP-Plugins

Neural network emulator for guitar amplifiers. LV2 plugin.

Neural Amp Modeler

Release 0.1.3<ul><li>Simplified NAM processing loop</li><li>Handle model loudness normalization in plugin</li></ul>

Release 0.1.2<ul><li>Added 5Hz high pass filter to clean up any DC offset created by the model.</li></ul>

Release 0.1.1<ul><li>Fixed model display after preset loading.</li></ul>

Odin 2: A Synth to Please the GodsThe sound of this 24-voice polyphonic beast will take you from your studio right to Valhalla. Earth shattering basses, exquisite leads or mad FX, Odin's got them all! Use the classic sound of analog waveforms - or draw your own. High quality emulations of legendary analog filters like the Moog-ladder or the Korg-35 further shape your signal. Round your sound off with four onboard FX, or get crazy with modulation. There's much to discover in Odin 2.This is the plugins package.

Odin2

JC303 is Bass Synthesizer Audio Plugin, a port of Robin
 Schmidt`s Open303, a Roland TB-303 clone plugin.
 Comes in LV2, CLAP and VST3 format

jc303

<ul>
 <li>8 internal parameters for sound MOD, inspired on Devil
 fish! (not a clone of devil fish!!! do not expect same
 sound!) Decay Knob: from 200ms...2000ms to 30ms
 ... 3000ms</li>
 <li>switch button for restore original internal parameters
 of 303 clone sound.</li>
 <li>Reinforce the Open303 powered by!</li>
 </ul>

<ul>
 <li>First internal parameter for synthesis hack: slide time</li>
 <li>CLAP format support</li>
 </ul>

A Roland TB-303 clone, LV2/VST3/CLAP plugin

Uhhyou Plugins in VST3
 It contains the following synthesizers:
 <ul>
 <li>ClangSynthh</li>
 <li>CollidingCombSynth</li>
 <li>CubicPadSynth</li>
 <li>EnvelopedSine</li>
 <li>FDNCymbal</li>
 <li>GenericDrum</li>
 <li>IterativeSinCluster</li>
 <li>MaybeSnare</li>
 <li>MembraneSynth</li>
 <li>LightPadSynth</li>
 <li>SyncSawSynth</li>
 <li>TrapezoidSynth</li>
 <li>UltraSynth</li>
 <li>WaveCymbal</li>
 </ul>
 It contains the following effects:
 <ul>
 <li>AccumulativeRingMod</li>
 <li>BasicLimiter</li>
 <li>CombDistortion</li>
 <li>EsPhaser</li>
 <li>FDN64Reverb</li>
 <li>FeedbackPhaser</li>
 <li>L4Reverb</li>
 <li>LatticeReverb</li>
 <li>LongPhaser</li>
 <li>MiniCliffEQ</li>
 <li>NarrowingDelay</li>
 <li>OrdinaryPhaser</li>
 <li>ParallelComb</li>
 <li>ParallelDetune</li>
 <li>PitchShiftDelay</li>
 <li>RingModSpacer</li>
 <li>SevenDelay</li>
 <li>UltrasonicRingMod</li>
 </ul>

UhhyouPlugins

<ul>
 <li>Added randomization button to ClangCymbal.</li>
 </ul>

Added a randomization button to GenericDrum.

SpectMorph allows to analyze samples of musical instruments, and to combine them (morphing). It can be used to construct hybrid sounds, for instance a sound between a trumpet and a flute; or smooth transitions, for instance a sound that starts as a trumpet and then gradually changes to a flute. In its current version, SpectMorph ships with many ready-to-use instruments which can be combined using morphing.This packages contains Audio Plugins in LV2, VST and CLAP formats.

SpectMorph

guitarix is a virtual guitar amplifier. This package provide guitarix as a VST3 plugin for use inside your favourite DAW.

Guitarix VST3

Carla is a fully-featured audio plugin host, with support for many audio drivers and plugin formats.

Carla

Audio Plugin Host

Änderungen in Version 2.5.8

Von der Gemeinschaft entwickelt